Wynn Danzur Marketing

Over 25 Years Of Service!

Home for Aluminum, Bronze, and Alloy Castings

Other Conventional Casting Processes



Stack Molding


Stack molding is a a high production, sand casting, or green sand molding process. The piston ring people know this method well. Simply explained, the bottom of a given flask in a stack provides the cope of the flask below, while the top, provides the drag of the next layer…"pan caked- casting ".


Process: Ina stack mold the two mold parting surfaces or mold split lines. A stack mold does not require much more clamp force than a single phase mold because the projected part surface areas of the cavities on both sides of the center block cancel out each others force. A rule of thumb for a clamp force estimate is to take the projected part surface area times the melt pressure and multiply it by a factor of 1.1.


Without increasing the machine platen size you can double the amount of cavities producing parts. Most stack molds have an equal number of the same cavities in each parting surface. For example, a 2+2 cavity grid mold with an 8+8 hotrunner produces four identical parts per cycle. Some stack molds have different cavities in each mold parting surface and they produce a family of parts per shot, each different in shape and size (such as this collapsible crate). The floor and four side walls of this collapsible crate are produced in one shot. Fill, pack, cool and warp analysis accurately simulate the flow of the melt during the design phase of a project. This optimizes plastic part quality and the production output by improving cycle time.


Some stack molds can also handle multi-material injection, different materials such as hard/soft combination or multi-color molding. Three level stack molds are not as common as two level stack molds.


When the stack mold opens for the ejection of parts, both mold parting surfaces open (in most cases simultaneously) by means of a mechanical connection between the mold center block, the fixed halves of the mold and the moving half of the mold.



Illustration of How it works:




Legal | Disclaimer | Contact Us | Links | Videos | Special Thanks

Copyright © 2011 / 2012 / 2013 wynndanzur.com  / murdec / murzoproductions / Wynn Danzur Marketing

Total Views

Design by 1st-Class Designs www.1st-classdesigns.com | Let us build your website